Famous How To Reset Maintenance Light On Honda Crv 2003 Ideas

The Light Should Go Off.

Press the select/reset knob for another 5 seconds or until the oil life display begins. This info will also be in your owners manual. Press and hold the knob for about 10 seconds.

Insert The Key Into The Ignition And Turn It To The “On” Position.

Hold the button for about 10 seconds until the indicator goes off. In fact, some aftermarket daytime running light devices designed to turn on the headlights, parking lights, or both as soon as you turn the ignition switch to on (ii), must be disabled before the indicator can be reset. Press the select/reset knob for about 10 seconds or until the display begins to blink.

Web 1) Put The Key In The Ignition Without Turning.

How do you turn off the check engine light on a 2003 honda crv? At the same time, turn the ignition to the on position, but do not start the car. Web to reset the oil light on a honda crv, simply turn the key to the “on” position in the ignition, then turn it off.

Press And Hold The Select/Reset Button In The Instrument Panel And Turn The Ignition Switch To Run (One Position Before Starting).

Select “oil life” by turning the select/reset knob one click to highlight “oil life”, then press the select/reset knob to enter the reset mode the engine oil life and maintenance code (s) will then begin to blink. Web press the trip knob (located on the instrument cluster) repeatedly until “oil life” appears on the screen. Turn the ignition off and then start the engine to verify the indicator has been reset.

To Reset The Oil Light On A Honda Crv, Follow These Easy Steps.

Keep the ignition on for a moment and wait for the vehicle’s electronics to initialize. Select the ‘‘oil life’’ indicator by turning the select/reset knob. Web quickly turn off that pesky maintenance service light on your dash!thanks for helping me get to 1000 subscribers!